Inserting the Paper Roll into the PAX Terminal Integrated Printer

The PAX terminal comes with one thermal paper roll that must be inserted into the device's integrated printer. The paper is used to print transaction receipts.
Follow these steps to insert the paper roll into the printer:
  1. Remove the protective seal from the paper roll.
  2. Find the printer hatch on the top-rear of the terminal.
  3. Open the hatch by pulling the printer cover switch toward the bottom of the device.
  4. Review the diagram on the inside of the hatch, showing the correct way to insert the paper roll.
  5. Insert the thermal paper roll as shown on the diagram.
  6. Pull out approximately 1 inch of the paper beyond the hatch. This action reduces the possibility of a paper jam when you print your first receipt.
  7. Close the hatch. When the paper roll is inserted incorrectly, an error message appears on the terminal screen.
  8. To tear off the printed receipt, pull the paper at a 45-degree angle against the integrated paper cutter.