On This Page

{#jumplink-list}  
[Markdown](/docs/cybs/en-us/pax-a35/activation/all/pax-a35/pax-a35/pax-a35-get-started/pax-a35-setup-intro/pax-a35-connect-multifunctional-cable-connect.md)  
Filter  
FILTER BY TAG

Connect the Multifunctional Connector Cable to the PAX Terminal {#pax-a35-connect-multifunctional-cable-connect}
================================================================================================================

Have a screwdriver available to attach the cover to the terminal. For information about accessing the multifunctional port, see [Access the Multifunctional Connector Cable Port on the PAX Terminal](/docs/cybs/en-us/pax-a35/activation/all/pax-a35/pax-a35/pax-a35-get-started/pax-a35-setup-intro/pax-a35-connect-multifunctional-cable-access.md ""). Follow these steps to connect the multifunctional connector cable to the PAX terminal.

1. Locate the multifunctional port plug on the multifunctional connector cable.

   #### ADDITIONAL INFORMATION

   #### Figure: {#pax-a35-connect-multifunctional-cable-connect_fig_wyk_ztw_qwb}

   PAX A35 Multifunctional Connector Cable with Parts Labeled  
   ![PAX A35 Multifunctional Connector Cable with Parts Labeled](/content/dam/documentation/cybs/en-us/topics/payments-processing/pos-terminals/pax-a35/images/pax-a35-mltifunc-connector-cable-600x200.svg/jcr:content/renditions/original)

2. Insert the port plug into the multifunctional port in the compartment on the back of the PAX terminal.

   #### ADDITIONAL INFORMATION

   #### Figure: {#pax-a35-connect-multifunctional-cable-connect_fig_ylh_c1x_qwb}

   PAX A35 Back Compartment Showing Multifunctional Port and Connector Cable Attachment  
   ![PAX A35 Back Compartment Showing Multifunctional Port and Connector
   Cable Attachment](/content/dam/documentation/cybs/en-us/topics/payments-processing/pos-terminals/pax-a35/images/pax-a35-back-cover-removal-600x330.svg/jcr:content/renditions/original)

3. Make sure to place the cable into the channel located at the end of the compartment so that the cover can be closed over it.

4. Replace the cover on the terminal and slide it closed over the cable and compartment.

5. Replace each screw in its hole and tighten with a screwdriver until the cover is secure. To avoid damaging the terminal, do not over-tighten the screws.  
   RELATED TO THIS PAGE