On This Page

{#jumplink-list}  
[Markdown](/docs/cybs/en-us/pax-a35/activation/all/pax-a35/pax-a35/pax-a35-get-started/pax-a35-setup-intro/pax-a35-connect-multifunctional-cable-access.md)  
Filter  
FILTER BY TAG

Access the Multifunctional Connector Cable Port on the PAX Terminal {#pax-a35-connect-multifunctional-cable-access}
===================================================================================================================

Have a screwdriver available to remove the screws from the compartment cover. The multifunctional port is located in the compartment on the back of the PAX terminal. Access the port so that you can connect the cable to the PAX terminal. For more information, see [Connect the Multifunctional Connector Cable to the PAX Terminal](/docs/cybs/en-us/pax-a35/activation/all/pax-a35/pax-a35/pax-a35-get-started/pax-a35-setup-intro/pax-a35-connect-multifunctional-cable-connect.md "").

#### Figure: {#pax-a35-connect-multifunctional-cable-access_fig_gmq_pvw_qwb}

PAX A35 Compartment  
![PAX A35 Back Compartment with Arrows Pointing to Screws for Removal](/content/dam/documentation/cybs/en-us/topics/payments-processing/pos-terminals/pax-a35/images/pax-a35-back-cover-removal-600x215.svg/jcr:content/renditions/original)  
Follow these steps to remove the back cover and access the multifunctional port.

1. Use a screwdriver to loosen the two compartment cover screws.
2. Remove the screws and set them aside. You will reinstall the screws later.
3. Slide the rear cover off the terminal to access the multifunctional port compartment.
4. After you connect the multifunctional connector cable to its port in the compartment, replace the cover and screws.
5. Tighten the screws to secure the compartment cover. Do not over-tighten the screws.  
   RELATED TO THIS PAGE